Accessories

Chromatic tuner, metronome and tone generator;Illuminated LCD-display and 3 LEDs;Calibrated tuner (430-450Hz), chromatic tuning, guitar, bass, violin, ukulele, flat-tuning (4 semitones) for guitar and bass;Metronome: 30 - 250 BPM, 10 beat variations, 8 rhythms;Tone generator: chromatic tuning (4...

Automatic, clip-on tuner;Tuning modes: chromatic, guitar, bass, ukulele;LCD-Needle display with background light, colour change at the right tone;Precision: +/- 0,5Cent, Calibration 440 Hz;With 1x Lithium coin cell CR2032;Measurements (folded): ca. 48 x 42 x 27mm, weight: 20g;;

Display with 7 LEDs and 3 additional LEDs for fine tuning;With guitar and bass mode, also suitable for violins, mandolins etc. ;Precision: +/-0,5 Cent;Jack plug input, integrated microphone;Measurements: 102 x 50 x 17 mm;Weight 36 g;Supplied with 2 x 1,5 Volt AAA batteries;;

Set of Japanese nut files ;Set for acoustic guitar, 3 files with 2 strengths each ;Adjusted to the most common string diameters in inches;File 1, red handle: .016" & .042";File 2, blue handle: .026" & .050";File 3, yellow handle: .036" & .055";Available only as complete set;;Made in...

Set of Japanese nut files ;Set of 10 individual files ;Total length 150mm, blade 115mm;.010", .013", .016", .024", .028", .032", .036", .042", .046", .056";Available only as complete set;;Made in Japan

File to trim and refine frets, abrade marks, round the edges;To reconstruct the fret profile and to remove metal edges;Total length with rubberized handle 195 mm, file length 105 mm;For narrow fret profile, ca. 1 mm, e.g. for ukulele, mandolin and banjo;narrow;Made in Japan

File to trim and refine frets, abrade marks, round the edges;To reconstruct the fret profile and to remove metal edges;Total length with rubberized handle 195 mm, file length 105 mm;For large fret profile, ca. 3 mm, e.g. for jumbo frets and E-bass;large;Made in Japan

For the treatment of the heel of the frets on the edge of the fingerboard;Also as crude file to trim frets;Dimensions: 160 x 28 mm;;Made in Japan

File to trim and refine frets, abrade marks, round the edges;To reconstruct the fret profile and to remove metal edges;Total length with rubberized handle 195 mm, file length 105 mm;For medium fret profile, ca. 2 mm, e.g. for regular guitar frets;Medium;Made in Japan